Surgical Camera

MCC-500MD Sony HD Medical Video Camera

Code MCC-500MD



Space saving two-piece Sony HD medical video camera.

If you need help with any of our products you can speak to our dedicated online team

   Contact Us +44 (0)1487 843 193

Some more products you may like

Sony 3CMOS HD Medical Video Camera



Space-saving two-piece camera offers HD image quality and convenient integration with modern medical modality devices.

This two-piece HD colour video camera consists of a light, compact camera head and separate CCU (Camera Control Unit). The complete system is designed for convenient integration with medical modality equipment such as slit lamps and surgical microscopes.

High quality image reproduction is enabled by latest-generation Exmor™ CMOS sensor technology, offering improved low-light sensitivity compared with traditional equivalent-sized image sensors.

Brightness and colour can be easily adjusted from the CCU front panel, while workflow is further enriched with a range of useful imaging features and shooting modes. Customised picture profiles can be stored and recalled instantly, reducing time-consuming set-up between procedures.

The complete camera system can optionally be controlled from an external host device such as a computer. In addition, the camera head can be sited as far as 20m from the CCU (requires optional cables) for greater operational and integration flexibility.

Full HD video images can be viewed on a connected monitor (not included), or recorded for subsequent sharing and analysis with a suitable video recorder such as the Sony HVO-1000MD.

Read More


Crisp, clear Full HD images

The MCC-500MD is equipped with a 1/2.9-type single Exmor™ CMOS image sensor. Low-light sensitivity is improved compared with conventional equivalent-sized sensor technology, contributing to picture quality that approaches the performance of more costly three-chip cameras.

Small, light camera head with C-Mount

Installation in space-constrained locations is simplified by the camera head’s compact size and light weight. The lens mount part of the camera head is a C-mount type that’s commonly used for surgical microscopes or slit lamp medical applications.

Support for wide range of HD and SD video formats

The MCC-500MD supports both Full HD (1080 60p/50p) and Standard Definition video formats for greater operating versatility. This also offers the benefit of straightforward migration from SD to HD-based workflow as required.

Control camera head remotely from up to 20m

For greater operating versatility, the camera head unit and camera control unit can be connected over distances up to 20m using an optional camera cable. Cables are available in 6m/10m/15m lengths, as well as an additional 5m extension cable.

Easily recall custom picture profiles

Up to six different picture profiles – including exposure, sharpness, gamma, colour tuning and white balance – can be saved to memory. Custom settings can be instantly recalled from the CCU front panel to suit various applications, including use of different lamp sources.

Image flip

The camera output can be ‘flipped’ vertically, horizontally, or both vertically and horizontally. The flip function can also be activated by an optional foot switch for convenient hands-free operation.

Picture freeze

Pressing the ‘Freeze’ button during normal operation causes the camera to output a still image.

Fluorescein Mode

Clear images can be viewed during fluorescein shooting under green lighting, with no need to use a special yellow filter.

Versatile connection with wide range of interfaces

The MCC-500MD is generously equipped with a variety of video and control interfaces. These include a 3G-SDI output, HDMI output supporting 1080/60P and 1080/50P, plus analogue composite and S-Video outputs. A D-sub 9-pin connector is provided for PC control of the camera via RS-232C, while two mini-jacks allow connection of optional foot switches.

Control by computer

The MCC-500MD can be controlled from a computer via its standard RS-232C interface.

Two camera support for 3D shooting

Images from two MCC-500MD units can be synchronised to allow acquisition of 3D video images. The two camera control units can be connected using an optional BNC cable via the CCU’s 3D-SYNC IN/OUT connectors.

Colour bar for convenient set-up

The camera can be switched from its normal output picture to a colour bar, assisting with easy connection checks during camera installation.

Direct AC power operation

The camera control unit is powered directly via a standard AC power cord, with no need for an external adaptor. This can save space when the unit is installed on a modality device or video cart.

Support for relevant medical safety standards

This camera is compliant with and certified for IEC 60601-1 and product safety standards in the U.S.A., Canada, and Europe*.

Read More


Next day delivery is available on orders placed before 12pm Monday – Friday in most areas. Orders placed on a Saturday and Sunday will be delivered on the following Tuesday. Next day delivery is only available if the items ordered are in stock.

Exclusions from next day delivery include:

Off-shore and remote areas*.
Items which are not in stock at time of order – These will be despatched as soon as they become available.
Next Day delivery is not available on Bank Holiday weekends
Imotek International Ltd use a third party courier for all deliveries. Delivery charges are dependant upon total order weight. UK Only.

Courier for orders over 750g and over £40

1-25 Kgs £9.00

26-50 Kgs £17.50

51-75 Kgs £26.00

75+ Kgs Price on application

*For off-shore and remote areas including Northern Ireland, Highlands, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands, delivery charges are available on request.

All products are subject to availability. Please see our full Terms and Conditions.
Read More

Related Documents

Would you like a quotation?

If you would like to receive a quotation or want more information on this product, please complete and submit the below form.

  Dedicated sales line +44 (0)1487 843 193

Explore Imotek

Veterinary Equipment Sales

UK Based Imotek International Ltd offers complete sales & service support for a wide range of veterinary ultrasound & MRI... SHOWCASE

Service Department

Imotek's Service Department, offers a range of servicing options for a variety of medical and veterinary equipment. We have a team... Service Department



All Articles
Need further help or advice? Our team of experts is on hand to answer your questions.

Call us on

+44 (0)1487 843 193

Stand B21 - London Vet Show 2023

Read More

Welcome to our new look website

Read More